Refrigerator · Safe first checks
Why is my refrigerator not cooling?
A warm fridge may have cooling switched off, blocked airflow or a door that is not sealing. A power interruption or recent installation can also affect temperature. Check an appliance thermometer instead of judging the air by touch, and protect perishable food before waiting for a repair.
WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis
Protect food before diagnosing the fridge
Move perishables to a working refrigerator or an iced cooler when safe temperature cannot be maintained. The four-hour power-outage guidance is not a blanket permission to keep food that has already been warm; time above safe temperature matters.
Safe checks you can do
Measure the temperature
Use a fridge thermometer and record the reading. A display may show the target rather than the actual temperature. Keep door openings brief while you arrange safe food storage.
Confirm cooling is switched on
Check the manual for cooling-off or showroom settings. Confirm the temperature control was not changed accidentally. Do not assume a lit interior means the cooling system is working.
Clear the interior air vents
Move packages away from vents and leave space for air circulation. Avoid packing food tightly against the rear wall. Do not pry away ice or remove air ducts.
Check door closure and seals
Look for a drawer, bottle or packaging holding the door open. Wipe accessible seals gently as the manual directs and check for tears. A damaged seal may need replacement.
Review location and recent changes
Look for a blocked exterior base grille or a nearby heat source. After installation, loading or a power interruption, follow the manufacturer’s cooling-time guidance while keeping food safe elsewhere.
Clean only owner-accessible areas
Some refrigerators need no routine coil cleaning. If your manual gives an accessible coil-cleaning procedure, disconnect power first and follow it exactly. Never remove service panels, touch refrigerant lines or pull a heavy fridge on your own.
When to stop and call a professional
- Food cannot be kept at a safe temperature or cooling stays poor after accessible checks.
- There is a burning smell, damaged cord, unusual heat or water around electrical parts.
- Ice buildup, persistent noise or a suspected fan, compressor or sealed-system fault needs internal work.
Seeing an error code?
Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.
Sources and model instructions
Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.
Spotted something wrong or out of date? Report a correction so we can check it against the sources.
Related repair guides
Still stuck with your refrigerator?
Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.
Try the free troubleshooter