For independent property managers with 10–100 units

Know every unit's repair history. Sort every request before you pick up the phone.

Made for landlords and small property managers who run their own maintenance — roughly 10 to 100 units, without a maintenance department. A QR code in every unit. Tenants report problems in seconds, Ava keeps them safe and solves the simple ones, and you get a clear work order with priority, trade and likely cause — ready to send to a vendor, and kept in that unit's record.

Free during early access · No card · Tenants never need an account

Who it is for

  • Independent property managers and landlords with about 10–100 units, in houses, duplexes and small apartment buildings, who coordinate repairs themselves.
  • Short-term rental operators (Airbnb and similar): set each listing up as a unit and keep its devices, manuals, repair record and vendors in one place.
  • Tenants and guests use the private link their landlord or host sends: no account, no cost.
  • Homeowners keep their own appliance records and ask Ava about a specific appliance — free to start.

Not built yet for large commercial buildings, hotels or very large portfolios. If you run one of those, tell us what you need.

For Airbnb and short-term hosts

See the full page for hosts, including turnover checks →

  • Make each listing a "short-term stay" home. The guest page says "your stay" and "send to my host".
  • Record every appliance with its manual and warranty, and the things guests ask about: water shut-off, breaker panel, bin day, house rules.
  • Share only what you choose. Anything you don't tick stays private, so door codes and similar secrets stay hidden.
  • Guests report a broken oven or leak from their phone. Ava gives safe first steps while the report reaches you with the device named.
  • Change the link between stays and the old one stops working.

For tenants and guests

You don't sign up. Your landlord or host gives you a private link or QR code for your home. Open it to see your devices and manuals, repairs and their status, upcoming maintenance, and anything they've chosen to share, such as shut-off locations. Report a problem in a few lines and get safe things to try while you wait. Your report goes only to them.

Without WEPAIR

  • "The dishwasher's broken" texts at night, with no model, no photo, no detail
  • Call-outs for tripped breakers and clogged filters
  • Emergencies buried between routine requests
  • No record of which unit keeps breaking, or what it costs

With WEPAIR

  • One sorted list: emergency, urgent, routine
  • Each job comes with trade, likely cause, appliance model and access permission
  • Ava talks tenants through safe first checks — some never need a visit
  • Your own vendors accept, quote and close jobs from a text message
  • Leak sensors and recurring maintenance catch problems before tenants do
  • One private page per home: devices, repairs, upcoming maintenance
  • A printable, dated repair record for every unit

What lands on your dashboard

Instead of a 9 pm text that says “sink broken”, you get this — sorted by urgency, with what the tenant was already told to do.

Tenant report · via unit QR codeExample — made-up unit and tenant

Water under the kitchen sink · Unit 2B, 14 Example St

“There's a puddle under the sink and the cabinet floor is soft. It drips when the dishwasher runs.”

Priority
Urgent · plumbing
What the tenant was told
Put a bowl under the drip, avoid running the dishwasher, and close the valve under the sink if the leak gets worse. Their report is with you.
Likely causes for your vendor
Loose dishwasher drain connection or a worn trap seal — needs a plumber to confirm.
Next step
Send to your plumber in one tap — they get the job link, address and this summary.

Illustration of the report format. Real reports come from your tenants' own words and Ava's triage of them.

How it works

  1. 1

    Put a QR code in each unit

    Add your buildings and units, then print a card for each one. No app for tenants, no accounts, no passwords.

  2. 2

    Tenants scan and describe the problem

    In their own words, any time. Emergencies like gas, smoke, sparks or flooding get stop-and-get-safe instructions instantly.

  3. 3

    Ava handles the easy ones

    A tripped breaker, a clogged dishwasher filter, a thermostat setting — Ava walks tenants through safe checks, so you skip the service call.

  4. 4

    You get a sorted work order

    Title, trade, priority (emergency, urgent or routine), likely causes, access permission and the tenant's contact — not a 9pm voicemail.

  5. 5

    Send it to a pro

    Text your own plumber a private job link — no app or account for them — or send it to verified local companies in the WEPAIR network. They reply with a quote and arrival time and close it out from their phone.

Built for the way property teams work

Emergencies first

Safety screen tested on 120 real-world phrasings. Emergency jobs jump to the top of your list with a banner you can't miss.

Fewer unnecessary call-outs

Ava suggests only safe, simple checks a tenant can do — never disassembly — and tells them their report is already with you.

Vendors who arrive prepared

Each job carries the unit's appliance brands and models, likely causes and the tenant's own description.

Repeat-problem alerts

See units with the same trade called twice or more — the washer that needs replacing, not a fourth repair.

BC tenancy rules built in

Reports that may be emergency repairs under section 33 of BC's Residential Tenancy Act (major leaks, blocked plumbing, primary heat, locks, electrical) are flagged with what that means for you, and your emergency contact is printed on every tenant card.

Leak sensors that call it in

Connect smart water, freeze or smoke sensors through Home Assistant, SmartThings, IFTTT and others. An alarm opens an emergency work order for that unit within seconds — before the ceiling below stains.

Maintenance on autopilot

Furnace service, smoke alarm tests, filters and dryer vents become scheduled work orders before they're due, assigned to your vendor, then repeat.

One page for every home

Record each unit's equipment — brand, model, warranty, manuals — plus shut-off locations and house info. Tenants, guests and owners open one private link to see their devices, repairs and what is coming up, and report a problem against the right device. You choose what each person can see.

A repair record for every unit

Print or save a dated history of every request, response time, vendor, note and cost — ready for a Residential Tenancy Branch hearing, an insurance claim or a sale. Each unit's equipment list goes to the vendor with every job.

Spend by property

Repair cost, jobs completed and average days to close for every building. Export everything to a spreadsheet.

Your team, your rules

Owners and managers run everything; maintenance staff see and update work orders only. Every company's data is private.

What is intake costing you?

Put in your own numbers. Then prove it with a pilot: set a start date in your portal and the scorecard compares time to assign a vendor, time to complete and repeat repairs — before versus after, from your real work orders.

Requests a year
120
Hours a year on intake: today → with WEPAIR
40 → 16
Time back each year
24 h · $960

This uses only the numbers you enter — it's a planning estimate, not a WEPAIR result. To measure the real difference, run a free pilot: the pilot scorecard compares your work orders before and after.

Early access

Free while we build it with you.

Unlimited units and tenant reports during early access. In return we ask for honest feedback. We'll give at least 30 days' notice before any pricing starts, and early-access customers keep a founding discount.

Questions

Do tenants need an account or an app?
No. They scan the QR code (or open the link) and describe the problem. Each unit's link is private, and you can make a new one when a tenant moves out.
What happens in an emergency?
Reports mentioning gas, carbon monoxide, smoke, fire, sparks, flooding near electrics, structural damage or injuries get immediate get-safe instructions (including calling 911) and are flagged Emergency on your dashboard. WEPAIR doesn't replace your emergency line — put that number on the card too.
Will Ava tell tenants to fix things themselves?
Only safe, simple checks — resetting a breaker, checking a setting, shutting a water valve, cleaning a filter the manual says users can clean. Never opening appliances, buying parts or calling their own contractor.
Do my vendors need to sign up?
No. Send them a private job link by text or email. They see the job, address and Ava's triage, accept with a quote and arrival time, post updates and mark it complete — all from their phone. You choose whether to share the tenant's contact.
Which leak sensors work?
Any sensor or hub that can send a web request when it detects water: Home Assistant, SmartThings, Hubitat, IFTTT, YoLink, Shelly and many more. Each sensor gets its own private key, and repeat alerts are added to one emergency work order instead of flooding your inbox.
Does it work with my property management software?
Work orders export to CSV today. Tell us which software you use — direct integrations are on the roadmap.
What does it cost?
Free during early access. We'll announce pricing at least 30 days before any charge, and early-access customers get a founding discount. Tenants are always free.
Where is my data?
In your private WEPAIR workspace. Other companies can't see your properties, tenants or work orders, and tenant reports go only to you.

Run a repair company?

Get pre-diagnosed rental repair jobs from local property managers. Join the WEPAIR repair network.

Fixing something at home instead?

Ava helps homeowners too — free to start.