Washer · Safe first checks
Why won’t my washer drain?
Water left in the drum can come from a slow-spin cycle, an unbalanced load, too many suds or a blocked or kinked drain hose. Some front-loaders also have a pump filter you can clean. Work through the simple causes first; a failed pump or control needs professional diagnosis.
WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis
Some water after delicate cycles is normal
Gentle, delicate and hand-wash cycles spin slowly and leave clothes wetter. A drum still holding standing water after a normal cycle is a different problem.
Safe checks you can do
Check the lid or door
Make sure the lid or door is fully closed. Many washers will not drain and spin unless they detect it is secure.
Rebalance the load
Spread items evenly or remove some. An unbalanced or overloaded drum can stop the spin and leave water behind. Run a Drain/Spin cycle afterwards.
Check the cycle and spin speed
Choose a cycle with a normal or higher spin, as long as the care labels allow it. Delicate cycles are designed to spin slowly.
Use the right amount of detergent
Measure detergent as the manufacturer directs; for HE washers use HE detergent. Too many suds can stop the washer from pumping out.
Inspect the drain hose and standpipe
With the washer unplugged, straighten any kink and check for a clogged hose, drainpipe or utility sink. Your installation instructions give the correct hose shape and standpipe height — water can flow back if the pipe is too high.
Clean the pump filter, if your model has one
Some front-loaders have a small access door with a drain-pump filter. Follow your manual exactly: unplug first, drain the water into a pan, then clear lint and debris. Do not open it if your manual does not describe it.
When to stop and call a professional
- Water stays in the drum after the checks above and one Drain/Spin cycle.
- There is a burning smell, a loud grinding noise, a leak onto the floor or a tripped breaker.
- The washer shows an error code that your manual says needs service.
Seeing an error code?
Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.
Sources and model instructions
Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.
Spotted something wrong or out of date? Report a correction so we can check it against the sources.
Related repair guides
Still stuck with your washer?
Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.
Try the free troubleshooter