Renters · Safe first checks

My rental appliance broke in BC — who fixes it?

In British Columbia, a landlord generally has to keep appliances that came with the rental in working order, and tenants are expected to report problems. Start with the simple, safe checks below, then ask for the repair in writing. Do not hire your own technician or open the appliance before checking your tenancy agreement and the official BC guidance, because who pays can depend on the situation.

WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis

Regular repair or emergency?

BC separates regular repairs from emergency repairs, such as major leaks, damaged electrical systems or a failed primary heating system. Most broken appliances are regular repairs, but water flooding from a washer or an electrical fault may be urgent. Check the BC government repairs page for the current definitions and steps.

Safe checks you can do

  1. Rule out the simple causes

    Check that the appliance is plugged in, the breaker has not tripped and any door or lid is fully closed. For a fridge, make sure vents inside are not blocked by food. Reset a tripped breaker once only if the panel is dry and undamaged.

  2. Write down what happens

    Note the date it stopped working, what you see or hear and any error message. Take a photo of the problem and the model label if it is easy to see without moving the appliance.

  3. Ask for the repair in writing

    Send your landlord or property manager a short, dated message or email describing the problem and asking for a repair. Keep a copy. A written request gives both sides a clear record.

  4. Protect your food and belongings

    If the fridge has failed, keep the doors closed and move food to a cooler if needed. Keep receipts and photos of anything you lose, in case it comes up later.

  5. Allow access for the repair

    Agree on a time for the technician to visit. In BC, landlords normally give written notice before entering unless you agree to a time or it is an emergency.

  6. Know where to get help

    If the repair is not done in a reasonable time, read the BC Residential Tenancy Branch guidance on repairs and dispute options before taking further steps.

When to stop and call a professional

  • You smell gas, see smoke or sparks, or there is water near electrical parts.
  • Water is leaking and you cannot stop it by turning off the appliance's supply valve.
  • The landlord has not responded in a reasonable time; check the official BC repair and dispute guidance instead of repairing it yourself.

Seeing an error code?

Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.

Sources and model instructions

Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.

Spotted something wrong or out of date? Report a correction so we can check it against the sources.

Related repair guides

Still stuck with your renters?

Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.

Try the free troubleshooter