Dishwasher · Safe first checks
Why are my dishes still dirty after the dishwasher?
Food left on dishes can come from overcrowding, blocked spray paths, a dirty filter or a cycle that does not suit the load. White film is different from food residue and may involve detergent or water conditions. Start by identifying what remains before changing parts or products.
WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis
Food residue, film or water spots?
Food particles suggest wash coverage or filtration issues. A cloudy film or spots may require manual-directed detergent and rinse-aid adjustments. Do not assume every dirty-looking dish means the circulation pump has failed.
Safe checks you can do
Give water a clear path
Load dishes as the manual shows, with dirty surfaces facing the spray. Avoid nesting bowls and spoons. Move tall items away from spray arms and keep the detergent dispenser unobstructed.
Check spray-arm clearance
With power disconnected and the tub cool, gently check that accessible arms can move without striking a plate. Wipe visible debris only as the manual allows; do not dismantle internal water connections.
Clean the user-removable filter
Follow the exact removal and reinstallation procedure for your model. Rinse away food and use a soft brush if allowed. Do not assume every dishwasher has the same removable filter.
Check detergent and the dispenser
Use fresh dishwasher detergent and the amount recommended for your machine and water conditions. Keep the dispenser dry before adding a tablet. Do not mix cleaning chemicals or add hand dish soap.
Match the cycle to the load
A quick cycle may not suit dried-on food. Use the manufacturer’s recommended normal or heavy cycle and scrape large scraps first. Check that the accessible water-supply valve was not turned off; do not force a stuck valve.
Compare the next ordinary wash
After correcting loading and filter issues, inspect the next safe normal wash. If detergent remains trapped or cleaning stays poor, record the cycle and symptoms for service rather than opening panels.
When to stop and call a professional
- Dishes remain dirty after loading, detergent and manual-directed filter checks.
- There is no apparent water circulation, repeated incomplete cycles or persistent dispenser trouble.
- There is leaking, smoke, burning or water near electrical parts.
Seeing an error code?
Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.
Sources and model instructions
Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.
Spotted something wrong or out of date? Report a correction so we can check it against the sources.
Related repair guides
Still stuck with your dishwasher?
Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.
Try the free troubleshooter