Dishwasher · Safe first checks

Why is my dishwasher not draining?

Standing water after a finished cycle can come from a blocked filter, an obstructed drain path or a sink drain that backs up. Start with the accessible checks below. A pump or internal blockage needs professional diagnosis, not a guess from the sound alone.

WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis

Is a little water normal?

Some models keep a small amount of water in the sump beneath the filter. Water spread across the tub floor after a completed cycle is different. Check your model manual before assuming any water means a failed pump.

Safe checks you can do

  1. Confirm that the cycle finished

    A paused or interrupted wash may still contain water. With the door closed and no leak or electrical warning, use the manual’s Cancel/Drain option before doing anything inside.

  2. Clean the removable filter

    With power disconnected, remove only the filter your manual identifies as user-cleanable. Rinse it and gently brush away food. Do not dismantle the pump; scoop excess cool water with a cup if necessary.

  3. Check the shared sink drain

    If the sink also drains slowly, the restriction may be in the shared plumbing. Resolve that drain problem rather than repeatedly running the dishwasher. Never add chemical drain cleaner to the dishwasher.

  4. Inspect the visible drain hose

    Look under the sink for a hose crushed by stored items or an obvious kink. Do not pull the dishwasher out, disconnect plumbing or alter the drain-loop arrangement without the installation instructions.

  5. Consider recent disposal installation

    If draining stopped just after a disposal was installed, ask the installer to check its dishwasher inlet connection and knockout plug. Do not remove it by reaching into the disposal.

  6. Check one drain cycle

    Reinstall the filter correctly and restore power only when everything is dry and closed. Run the manual’s drain cycle once. If water remains, stop repeating cycles and arrange repair.

When to stop and call a professional

  • Standing water remains after the filter and accessible drain checks.
  • Grinding or persistent humming occurs with no draining; it does not identify a specific failed part.
  • There is a leak, burning smell, damaged wiring or a repeatedly tripping breaker.

Seeing an error code?

Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.

Sources and model instructions

Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.

Spotted something wrong or out of date? Report a correction so we can check it against the sources.

Related repair guides

Still stuck with your dishwasher?

Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.

Try the free troubleshooter