Dishwasher · Safe first checks

Why is my dishwasher leaking?

Where the water appears tells you a lot. Leaks at the door often come from the seal, too many suds or a dishwasher that isn’t level. Leaks from underneath can come from the hoses, the valve, the pump or a tub fault. Make it safe first, then check the simple causes.

WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis

Use dishwasher detergent only

Hand dish soap makes huge amounts of suds that can push water out of the door. If dish soap was used by mistake, that alone can explain a leak.

Safe checks you can do

  1. Find where it starts

    Dry the floor, then look: at the door edges, at the front centre underneath, or behind and under the cabinet. Note it — it helps a technician too.

  2. Inspect the door seal

    Look for cracks, tears, flat spots or food stuck on the gasket, and anything stopping the door from closing fully. Wipe it clean.

  3. Check it is level

    An unlevel dishwasher can leak at the door. Your installation instructions explain how to adjust the levelling feet.

  4. Clean the filter and check the float

    With power off, remove and rinse the filter. If your model has a float in the tub, make sure it moves up and down freely and isn’t stuck.

  5. Load and dose correctly

    Don’t overfill the racks or let items block the spray arms or touch the door seal. Use only dishwasher detergent in the amount the manual recommends.

  6. Look at the visible connections

    Under the sink, look for drips at the supply and drain connections. Don’t disconnect plumbing or pull the dishwasher out of its cabinet yourself.

When to stop and call a professional

  • It still leaks after the seal, level, filter and detergent checks.
  • Water comes from underneath, the tub looks cracked, or it overfills.
  • Water has reached electrical parts, or the breaker trips.

Seeing an error code?

Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.

Sources and model instructions

Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.

Spotted something wrong or out of date? Report a correction so we can check it against the sources.

Related repair guides

Still stuck with your dishwasher?

Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.

Try the free troubleshooter