Dryer · Safe first checks

Why won’t my dryer start?

Most dryers that won’t start have a simple cause: the Start button wasn’t held long enough, the door isn’t latched, the controls are locked or power was lost at the breaker. Check these first. If it still won’t start, the door switch, controls or motor may need a technician.

WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis

Dead, or just not starting?

A dryer with no lights at all points to power. A dryer with lights that won’t start points to the door, the cycle choice or a control lock. Note which one you have — it helps a technician too.

Safe checks you can do

  1. Hold the Start button

    Press and hold Start for about 2–5 seconds. A quick tap may not be long enough to start the motor. On touch controls, use a dry fingertip, not a fingernail.

  2. Close the door firmly

    Push the door until the latch clicks. Some models have two latches. Check that no clothing is caught in the door or latch.

  3. Choose a drying cycle

    Select a timed or automatic dry cycle. Some settings, such as wrinkle-reduction only, may not start a normal cycle.

  4. Turn off the control lock

    If a lock light is on, your manual explains how to turn it off — often by holding a button for about three seconds.

  5. Check the breaker or fuses once

    Electric dryers usually use two breakers or fuses; gas dryers use one. At a dry, undamaged panel, reset a tripped breaker once. If it trips again, stop and call an electrician.

When to stop and call a professional

  • It still won’t start after these checks.
  • The breaker trips again, or there is a burning smell, scorching or a damaged cord or outlet.
  • You smell gas — leave and call the gas supplier from outside.

Seeing an error code?

Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.

Sources and model instructions

Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.

Spotted something wrong or out of date? Report a correction so we can check it against the sources.

Related repair guides

Still stuck with your dryer?

Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.

Try the free troubleshooter