Microwave · Safe first checks
Why is my microwave running but not heating?
A microwave that appears to run without heating may be in Demo mode, using the wrong setting or not registering a properly closed door. If simple controls and door checks do not explain it, stop using it and arrange service. A running fan and light do not prove the heating circuit is healthy.
WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis
A light and fan are not a heat test
Some models simulate operation in Demo mode. Others may run their ventilation fan independently of cooking. Check the cook timer and selected function in the manual; do not use an empty microwave to test it.
Safe checks you can do
Confirm the cooking command
Choose the intended cooking mode and press Start as the manual instructs. A kitchen timer or ventilation fan is not a cooking cycle. Check that a low power level was not selected accidentally.
Look for Demo or control-lock mode
Consult the exact model manual for how these modes appear and how to disable them. Do not apply a button sequence found for a different brand or model.
Check that the door closes normally
Remove an obvious item blocking closure. Wipe visible food residue from the door-contact surfaces according to the manual. Do not force the latch, defeat an interlock or adjust hinges.
Inspect accessible power connections
For an accessible countertop unit, look at the dry plug and cord without removing the casing. Stop for damage. Do not move a built-in unit or repeatedly reset a tripping breaker.
Record what happens on normal use
If there is no damage, sparking or other warning, note the chosen cycle and whether food stays cold during ordinary use with a microwave-safe container. Do not run empty or extend a test to compensate for a fault.
When to stop and call a professional
- The unit still runs without heating after correct settings and normal door closure.
- There is sparking, smoke, burning, abnormal noise or a repeatedly tripping breaker.
- The door, latch, hinges or seal are damaged. Never open the cover to test the magnetron, capacitor or wiring.
Seeing an error code?
Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.
Sources and model instructions
Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.
Spotted something wrong or out of date? Report a correction so we can check it against the sources.
Related repair guides
Still stuck with your microwave?
Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.
Try the free troubleshooter