Oven · Safe first checks
Why is my oven not heating?
An oven that stays cold may have an incorrect cooking mode, a delayed-start setting or a supply fault. If the controls are correct, a heating element, igniter, sensor or other internal fault needs a qualified technician. Do not diagnose a specific part from a cold oven alone.
WEPAIR AI editorial guide · Last updated · General guidance, not a model-specific diagnosis
Bake, broil or the whole appliance?
Note whether the display works, whether the selected bake or broil mode fails and whether a recent power interruption occurred. A clock lighting up does not prove the full heating supply is present. Do not run extra modes if there is any gas, smoke or electrical warning.
Safe checks you can do
Confirm the cooking mode
Select Bake or the intended mode and press the required Start command. A kitchen timer is not a cooking mode. Check that delayed-start or a manual-described special setting was not enabled accidentally.
Follow the normal preheat guidance
Allow the manual’s expected preheat time only when there is no safety warning. Keep the door closed and confirm the temperature setting. Do not use self-clean as a repair or heat test.
Review a recent outage or installation
After a power interruption, the clock or controls may need setting. For a newly installed oven, have the installer verify the supply and commissioning instead of moving the appliance or checking wiring yourself.
Inspect only accessible power clues
If a plug is visible without moving the oven and the area is dry, look for obvious damage. At a dry, undamaged electrical panel, a tripped breaker may be reset once if the manual permits. If it trips again, leave it off and call a qualified electrician.
Record symptoms for service
Note the selected mode, any display message and when the failure began. Do not remove heating elements, lift service panels, adjust a gas valve or test components with the power connected.
When to stop and call a professional
- The oven remains cold after correct settings and safe power checks.
- There is gas odor, hissing, smoke, burning, visible damage or a breaker that trips again.
- Any heating-element, igniter, sensor, wiring or gas-supply work is needed.
Seeing an error code?
Use the manual or manufacturer support page for your exact model. Code meanings vary; this guide does not assign a meaning to a manufacturer-specific code. Share the exact model and what happened before the code with your repair professional.
Sources and model instructions
Manufacturer links describe their own products. Use your model’s instructions where designs differ; these references do not imply an affiliation with WEPAIR AI.
Spotted something wrong or out of date? Report a correction so we can check it against the sources.
Related repair guides
Still stuck with your oven?
Tell WEPAIR AI what is happening and which checks you have tried. Add a photo if it helps. The free troubleshooter can suggest safer next steps and help you decide when a repair professional is needed. AI can make mistakes.
Try the free troubleshooter